LCI Dual Tension Displays

• Line Control Displays
• Line Control Software
• Installations & Applications
• Tensiometers

• LCI-90
• LCI-100
• LCI-90R
• Drum Counter
• Dual Tension
• LCI Quad
• Dual-Winch
• 4/8 Tension
• Options

• Monitor Line Tension (both cable and chain) in Double-Drum Winch Systems Through a Single Display Unit
• 320 x 240 EL (Electroluminescent) Display Readable In All Conditions
• Five Brightness Levels and a Full 160° Viewing Range
• Fully Sealed Stainless Steel Front Panel with Available Watertight Rear Enclosure
• Six Alarms, Independently Linked to Any High/Low Setpoint Parameters
• On Screen Calibration, Diagnostics, and Configuration Security
• UL and CE Rated, RoHS Exempt

Dual Tension Brochure (PDF) Dual Tension Manual (PDF)

LCI Dual Tension Display

LCI Dual Tension Display models are used to display two channels of line tension for winch and wire rope applications. Both the LCI-100 and the LCI-90 units are available in Dual Tension Display configurations.

As in our standard LCI units, heavy-duty 316 stainless steel front panels and sealed tactile pushbuttons are designed to perform flawlessly in extreme environments from -40°C to +75°C. A high performance 320x240 electroluminescent display panel is protected by an epoxy-sealed polycarbonate window, where tension data is displayed as both a digital number and as a horizontal bar graph.

The five pushbuttons located directly below the front display allow the operator to acknowledge alarms and to manipulate the unit's calibration and configuration menus. The LCI Dual Tension Displays can be user configured to accept inputs from two individual tension sensors, display the parameters in different units and resolutions, enable up to six channels of tension alarms (3 per tension input), and select from a variety of serial communication options.

We offer a full line of tensiometers. The perfect compliment for any of our line monitoring displays or software products.

General Specifications		Instrument Specifications
Power	16 W @ 85-250 VAC (LCI-100) 3.8 Amp @ 18-36 VDC (LCI-90) Other input voltages available	Analog Input	4 or 6 channels
Enclosure Size	H 5.7" x W 7.6" x D 5.0" (LCI-90) H 8.0" x W 10.0" x D 5.5" (LCI-100)	Count Input	Quadrature encoder, 5, 12-24 VDC Inductive proximity, Half Effect 10 kHz Bandwidth
Operating Temperature	-40°C to 75°C standard	Digitial I/O	4 or 8 Channels Opto modules DC output and dry contact
Environmental	Sealed, Waterproof front panel	Serial Communications	RS-485 (Optional), isolated, 2 wire RS-232 (Optional), 1 channel, non-isolated
See the Full Specs (PDF)